| 1. Clear interfaced surfaces of the oil pallet and the block of cylinders. |
| 2. Clear interfaced surfaces steel and алюминиево го oil pallets. |
|
|
3. Put a hermetic layer in flutes and outside of openings under bolts on an interfaced surface of the aluminum oil pallet. |
| 4. Establish aluminum section of the oil pallet on the block of cylinders and fix bolts. |
| 5. Examine the oil pump and check a condition of the mesh filter of a maslopriyemnik. |
| 6. Put a hermetic layer in diameter of 3-4 mm on an interfaced surface of steel section of the oil pallet. |
|
7. Establish steel section of the oil pallet and fix bolts. |
| 8. Further installation is made in sequence, return to removal. Establish the new oil filter and fill in oil in the engine. |