Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
- 12. Brake system
12.2. General information
12.3. Anti-blocking system of brakes (ABS)
12.4. Replacement of brake shoes of disk brakes
+ 12.5. Support of disk brakes
+ 12.6. Brake disk
12.7. Replacement of brake shoes of drum-type brakes
+ 12.8. Working brake cylinder
+ 12.9. Main brake cylinder
12.10. Brake pipelines and hoses
12.11. Pumping of hydraulic brake system
+ 12.12. Vacuum amplifier of brakes
12.13. Replacement of brake shoes of the hand brake on back disk brakes
+ 12.14. Adjustment of the parking brake
+ 12.15. Replacement of a cable of the hand brake
+ 12.16. Stoplight switch
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment
|
Disk brakes
|
Thickness of a forward disk:
|
| – the nominal |
28 mm
|
| – the minimum |
26 mm
|
| Thickness of a back disk: |
| – the nominal |
10 mm
|
| – the minimum |
9 mm
|
| Palpation of a brake disk |
0,05 mm
|
| Minimum thickness of a block of the hand brake |
0,8 mm
|
Drum-type brakes
|
Thickness of a brake slip
|
1,6 mm
|
| Internal diameter of a drum: |
| – the nominal |
228,6 mm
|
| – the maximum |
230 mm
|
Tightening moments
|
Bolts of fastening of a support:
|
|
– forward support
|
30 Nanometers
|
| – back support |
20 Nanometers
|
|
Brake tubes
|
26 Nanometers
|
| Bolts of fastening of the working brake cylinder |
10 Nanometers
|
| The main brake cylinder to the vacuum amplifier |
12 Nanometers
|
| The vacuum amplifier of brakes to a partition |
12 Nanometers
|
|
|