| 1. Remove a starter. |
|
2. Before removal of the traction relay from a starter put combination labels on the case of a starter and the traction relay. |
| |
3. Disconnect a wire of a food of the engine of a starter from the traction relay. |
|
4. Unscrew two screws of fastening of the traction relay to a reducer cover. |
|
|
5. Unscrew coupling bolts which fix a starter to a reducer cover. |
|
|
|
| 6. Remove the starter engine from the traction relay and a reducer cover with the block of gear wheels. |
| 7. Installation is made in sequence, return to removal. |