Toyota Camry

1992-1997 of release

Repair and car operation


Kamri's Toyota
+ General data
+ 1. Maintenance
- 2. Engine
   2.2. Operations on engine repair on the car
   2.3. Top dead point of the first cylinder
   + 2.4. Cover of a head of the block of cylinders
   + 2.5. Inlet collector
   + 2.6. Final collector
   + 2.7. Gear belt and pulleys
   2.8. Replacement of a forward sealing ring of a cranked shaft
   2.9. Replacement of a sealing ring of a camshaft
   + 2.10. Camshaft and pushers
   + 2.11. Head of the block of cylinders
   + 2.12. Oil pallet
   + 2.13. Oil pump
   + 2.14. Drive flywheel / plate
   2.15. Replacement of a back sealing ring of a cranked shaft
   + 2.16. Suspension bracket of the power unit
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment



2.8. Replacement of a forward sealing ring of a cranked shaft
PERFORMANCE ORDER
1. Remove a gear belt and a pulley of a cranked shaft.
2. Using a screw-driver which edge is wound with a sticky tape, take a sealing ring of a cranked shaft from a nest. Thus do not damage a nest of a sealing ring and a cranked shaft.
3. For simplification of removal of a sealing ring it is possible to cut out an opening in a face surface of a sealing ring.
4. Clear a nest of a sealing ring and grease a new sealing ring with pure engine oil.
5. Using a tubular opravka of the corresponding diameter, establish a sealing ring on a cranked shaft.