Toyota Camry

1992-1997 of release

Repair and car operation

Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
- 10. Automatic transmission
   10.2. General information
   + 10.3. Diagnostics
   + 10.4. Adjustment and replacement of a cable of a choice of transfers
   10.5. Check and adjustment of a cable of management by a butterfly valve
   + 10.6. Check, replacement and adjustment of the switch of blocking of a starter
   + 10.7. Lock of blocking of the lever of a choice of transfers
   - 10.8. Replacement of sealing rings
      10.8.2. Sealing ring of a drive of a speedometer
   + 10.9. Check and replacement of support of a transmission
   10.10. Electronic control system
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment

10.8.2. Sealing ring of a drive of a speedometer

GENERAL INFORMATION

The sensor of speed of the car and casing of the mechanism of a drive of a speedometer are located on a back part of a transmission.

PERFORMANCE ORDER

	1. Disconnect the electric socket from the sensor of speed of the car and remove the sensor and a casing of the mechanism of a drive of a speedometer from a transmission.
	2. Remove a sealing ring of round section from the case of the mechanism of a drive of a speedometer.
3. Establish a new sealing ring on the case механиз ма a drive of a speedometer and establish the mechanism of a drive of a speedometer and the sensor of speed of the car on a transmission.